ODI Longneck Softies Flangeless Grips | 135mm Soft BMX Grips
*SHIPS NEXT BUSINESS DAY
*SHIPS TO CA, NV, AZ IN 1-2 DAYS
*SHIPS ANYWHERE IN THE USA IN 2-5 DAYS
*SUPER SECURE CHECK OUT
*365 DAY RETURN POLICY
ODI Longneck ST Softies Flangeless Grips: the soft, classic BMX grip built to last
The ODI Longneck ST Softies are the classic ribbed Longneck BMX grip made with ODI's softest rubber, blended with a heavy duty compound so they stay soft and last a long time. They're flangeless, so your hands slide around freely for barspins and tailwhips, and at 135mm they fit cut down bars without trimming. Push in nylon bar ends seal the ends to keep dirt and water out. Pick from 8 colors to match your build.
- Length: 135mm, no trimming needed
- Flangeless design for barspins and quick hand catches
- Extra soft "Softies" rubber blended with a heavy duty compound
- Classic tapered rib Longneck pattern that absorbs hard landings
- 31mm outer diameter that feels good in small or big hands
- Heavy duty ODI nylon push in bar ends included
- Injection molded by ODI in Riverside, California
Will these grips fit my bike?
| Your bike | Fits? | Notes |
|---|---|---|
| 20" freestyle BMX | Yes | Fits standard 7/8" (22.2mm) BMX bars, with or without brakes |
| Big BMX / wheelie bike (24", 26", 29") | Yes | Same 7/8" bar size as 20" BMX |
| Kids' BMX (12"-18") | Yes, if the bar is 7/8" | The 31mm diameter is easy for young riders to hold |
| Mountain bike | Yes | MTB bars are also 22.2mm at the grip |
| Bars with a brake lever | Yes | 135mm leaves room for your lever on cut-down bars |
Specs
| Spec | Detail |
|---|---|
| Length | 135mm |
| Outer diameter | 31mm |
| Inner diameter | 7/8" (22.2mm) |
| Flange | None (flangeless) |
| Pattern | Tapered-rib Longneck |
| Compound | ODI Softies soft rubber blended with a heavy-duty compound |
| Construction | Single ply, solid inner end, thick reinforced outer end |
| Bar ends | ODI nylon push-in, included |
| Weight | 3.7 oz / 105g |
| Made in | Riverside, California |
| Colors | Black, Bright Red, Fire Red, Bright Blue, Aqua, Pink, Purple, Green |
Want a flange? Shop ODI Longneck ST grips
Shop ODI Longneck SLX grips
Shop all BMX grips
Product use
The ODI Longneck ST Softies are replacement or upgrade handlebar grips for freestyle BMX, Big BMX, wheelie bikes and kids' BMX bikes. Use them on the street, at the skatepark, on dirt jumps and at rideouts. To install, pull off your old grips, clean the bar, then slide the new grips on with a little rubbing alcohol, hairspray or an air compressor. Push the bar ends in once the grips are lined up.
Why BMX riders use ODI Longneck Softies
The Longneck is one of the most iconic BMX grips ever made, and the Softies version is the softest one ODI makes. Riders who go bare-handed love how the soft, tapered ribs cushion big landings and feel tacky in your hands. Street and park riders pick the flangeless version so nothing gets in the way when they catch a barspin. And at around $13 a pair, they're an easy upgrade that lasts.
Upgrade your ride today. Pick your color and add the ODI Longneck Softies to your cart. Every order ships next business day from Stacked BMX in Riverside, CA.
Problems with other grips, and why the Longneck Softies fix them
5 problems you'll run into with other BMX grips
- Hard rubber that hurts on landings. Cheap or stock grips use hard rubber that sends every hard landing straight into your hands.
- Flanges that get in the way. A flange can catch your hand when you're grabbing the bars back after a barspin.
- Grips that are too long for brake bars. Long grips crowd your brake lever, so you have to trim them down.
- Ends that tear and spin. Thin grip ends rip when the bike drops, and gaps let dirt and water in so the grip starts spinning.
- Soft grips that wear out fast. Many soft grips feel great at first, then tear or go flat in a few weeks.
5 reasons the ODI Longneck Softies are better
- ODI's softest rubber. The Softies compound cushions your hands on big drops and feels tacky without gloves.
- Flangeless design. Nothing to catch your hand, so you can pull barspins even when the catch isn't perfect.
- 135mm length. Fits cut down bars and brake setups with no trimming.
- Tough, sealed ends. A solid inner end, a thick outer end and push in nylon bar ends protect the grip and keep dirt and water out.
- Built to last. The soft rubber is blended with a heavy duty compound, so these grips stay soft and hold up to daily riding.
Shipping: Shipping rate is based off of your order's weight, dimensions and your location. Ships next business day, excludes weekends & holidays. More shipping info here.
We accept all major credit cards.
ODI Longneck ST Softies FAQ
How long are the ODI Longneck Softies flangeless grips? They're 135mm long with a 31mm outer diameter and fit standard 7/8" (22.2mm) BMX handlebars.
Are flangeless grips better for barspins? Yes. With no flange in the way, your hands slide on and off the grip freely, so you can still catch the bars when a barspin isn't perfect. That's why most street and park riders run flangeless grips.
Will these grips fit if I run brakes? Yes. At 135mm they leave room for a brake lever on most BMX bars, even cut-down bars, so you shouldn't need to trim them.
What's the difference between ODI Longneck ST, SLX and Softies? They all use the classic Longneck rib pattern. The Softies use ODI's softest rubber for the most cushion. Check the Longneck ST and Longneck SLX pages to compare length and feel.
Do these grips come with bar ends? Yes. Each pair comes with ODI heavy duty nylon push in bar ends. The grip ends are recessed so the plugs sit flush and seal out dirt and water.
Will these fit my Big BMX or wheelie bike? Yes. Most Big BMX and wheelie bikes use the same 7/8" bar size as 20" BMX bikes, so these grips fit.
Are soft grips better than hard grips? It comes down to preference. Soft grips like the Softies cushion your hands and feel tacky when you ride without gloves. Riders who wear gloves or like a thinner feel sometimes pick firmer grips.
How do I install BMX grips? Clean the bar first. Then use one of these methods:
Rubbing alcohol or hairspray: spray a little inside the grip, slide it on fast, line it up and let it dry.
Zip ties: lay a few zip ties along the bar, slide the grip over them, then pull them out and ride right away.
Air compressor: blow air into the grip to stretch it as you slide it on. This is the cleanest way to install or remove grips.
Why do my grips keep slipping? Slipping grips usually come from dirt or oil inside the grip, a bad install or worn out grips. Take them off, clean the bar and the inside of the grip, and reinstall. If they still slip, it's time for a new pair.
How often should I replace my BMX grips? Replace them when they tear, get hard or slippery, or the ribs wear flat. Riders who ride every day will go through grips faster.
What other BMX grips do pros ride? Along with ODI Longnecks, riders love Cult x Vans grips, Primo Cali grips, S&M BTM grips, Volume VLM grips and Demolition Axe grips.